RRPPB-36
Riot+ Pearl White/Black
Riot Size Chart
Includes Riot+, Riot TR+, Riot MTB+ and Riot Buckle.
Tip: Rotate your phone horizontally for best viewing experience
Bont Cycling EU | 36 | 37 | 38 | 39 | 40 | 40.5 | 41 | 42 | 42.5 | 43 | 44 | 44.5 | 45 | 46 | 46.5 | 47 | 48 | 49 | 50 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bont Cycling USA | 4 | 4½ | 5 | 6 | 6½ | 7 | 7½ | 8 | 8½ | 9 | 9½ | 10 | 10½ | 11 | 11½ | 12 | 12½ | 13 | 14 |
Internal Shoe Length | 225 | 230 | 235 | 240 | 245 | 250 | 255 | 260 | 265 | 270 | 275 | 280 | 285 | 290 | 295 | 300 | 305 | 310 | 315 |
Foot Length Range | 216-220 | 221-225 | 226-230 | 231-235 | 236-240 | 241-245 | 246-250 | 251-255 | 256-260 | 261-265 | 266-270 | 271-275 | 276-280 | 281-285 | 286-290 | 291-295 | 296-300 | 301-305 | 306-310 |
Standard Range | 84-95 | 85-96 | 87-98 | 88-99 | 89-101 | 91-102 | 92-104 | 93-105 | 94-107 | 96-108 | 97-110 | 98-111 | 100-113 | 101-114 | 102-115 | 104-117 | 105-118 | 106-120 | 107-121 |
Wide Range | 96-97 | 97-98 | 99-100 | 100-101 | 102-103 | 103-104 | 105-106 | 106-107 | 108-109 | 109-110 | 111-112 | 112-113 | 114-115 | 115-116 | 116-118 | 118-119 | 119-121 | 121-122 | 122-124 |
We recommend matching up the CM or JP number found on your current cycling shoes to the "Internal Shoe Length" millimetre (MM) measurement found on our size chart.
Assuming your current shoes are labelled accurately for length, matching up these numbers will give you the same shoe size as you are wearing now.
NOTE: DO NOT MATCH US/EU/UK SIZING.
PRINT SIZING PAGE
To find your Bont Cycling shoe size, download and print our all-new sizing page in A4 or US Letter and follow the instructions exactly as listed. Stand barefoot, mark with a straight edge your longest toe and widest part of your foot. Double check the length and width with a ruler to confirm your measurements.
You can also try our Brand Comparison tool, designed to compare your current cycling shoes to the most appropriate size in Bont Cycling shoes. Be advised, you should still note the width of both feet to determine the best fit.
NO PRINTER?
To find your size, take a piece of plain paper on a flat surface and place it directly up against a wall. Stand on the paper (barefoot) and ensure you have a 1mm gap between your heel and the wall. Plant your foot firmly on the ground mark the widest points of the inner and outer edges of your feet.
For the most accurate length, slowly roll your weight forward and onto the forefoot. Your heel should lift off the ground slightly during this process. Place a flat edge at the position of your longest toe, step off the paper and record the measurement from the wall edge of the paper to the longest toe (where you placed the flat edge against). Record the length. Repeat this step for both feet.
Once the measurements have been taken, use the Foot Length Range on the size chart to find your size. The Internal Shoe Length row refers to the precise internal measurement of the shoe in millimetres. We recommend a 5-8mm gap between your longest toe and the front of the shoe.
Example: Your feet measure 278mm in length (barefoot) and so you should consider size 45/10.5 as this will provide approximately 7mm gap due to the shoe having an internal length of 285mm.
Following selection of your size in EU or USA, move downward to select the most appropriate width. We recommend adding at least 1-2mm to your foot width to find the most appropriate shoe width. For example, you are looking at a Vaypor S and have determined your best shoe size is 45 and your feet measure 105mm (left) and 107mm (right) wide, with an additional 1-2mm added, you would still fit within the Standard Range. If your feet measure wide than 109/110mm (size 45/10.5) you should consider Wide fit.
NOTE: The stated size width range does not reflect the actual width of the shoe. Bont Cycling shoes are designed with structural support throughout the entire length including the forefoot and as such, the measured shoe width is designed to appropriately support the foot within the shoe. The width of the shoe will almost always be narrower than your foot which is intentional in order to provide the necessary support.
Please also keep in mind Bont Cycling shoes are designed around an anatomically correct last suitable for cycling however, this does not mean they are built in the 'bare foot' running shoe style.
For sizes that fall outside of our size chart, please get in touch HERE.
The Bont Cycling Riot+, the world's first carbon composite and heat moldable cycling shoe designed for road cycling and priced for the masses, now available with proven BOAPerformance Fit System.
The Riot+ combines Bont Cycling's professional-series technical features including anatomical power transfer platform for greater efficiency, replaceable sole guards, unique carbon composite shaping, competition grade materials and BOAPerformance Fit System to create the most technically-advanced entry-level road shoe available.
- Material - Carbon composite construction with anti-stretch Microfiber upper and Bont Cycling's proprietary Epoxy Thermoset Fiberglassheat molding technology.
- 4.8mm stack height for improved stability and injury prevention.
- Frontal Air Vents for breathability in all-weather conditions.
- Innersole -Comfort.
- Sole Guards - Replaceable heel and toe guards.
- Cleat t-nuts are not replaceable in the Riot+ series.
- Cleat Mounting - Standard 3-hole road pedal configuration with alignment grid.
- Closure System - Single-dial BOA L6 Performance Fit System and Z-Form Velcro strap.
- Weight - 280 grams (approximate weight based on size 42 shoe).
Place your order today and tracking will be sent to you within 5-7 working days, following fulfilment.
All sales on closeout and custom products are final. No refunds, returns or exchanges are permitted except with respect to any statutory warranties or guarantees that cannot be excluded or limited by law. This policy does not impact our warranty policy.